Include CO Detectors Into Your Security System

Putting CO detectors in your property is a great start, but you can improve your defense even more by including them into your home’s security. This supplies an additional form of protection, as your monitoring agents will receive notification any time a CO detector goes off. This support can prove to be vital, especially if an emergency occurs in the early morning hours and you don’t hear the alarm.

Include CO Detectors In Seattle With Your Home Security System

Safeguard your family against all types of risks with a comprehensive home security package from Secure24 Alarm Systems. Our CO and smoke alarms in Seattle are monitored in the same manner as your other security sensors. You’ll have assistance from a dedicated, 24-hour team whenever an urgent event arises. Contact (206) 451-1051 today to customize the defense of your home and family.

Residents must protect against numerous risks like burglary, fire, and flooding. But what about a danger that can’t be discerned by human senses? Carbon monoxide is different from other dangers because you might never realize it’s there. Even so, implementing CO detectors can easily shield you and your household. Explore more about this hazardous gas and where to place carbon monoxide detectors in your Seattle residence.

What Is Carbon Monoxide?

Known as the silent killer due to its lack of odor, color, and taste, carbon monoxide is a readily found gas formed by incomplete fuel combustion. Any appliance that utilizes fuels like an oven or fireplace may produce carbon monoxide. Although you usually won’t have problems, difficulties can crop up when appliances are not regularly maintained or adequately vented. These mistakes can lead to a proliferation of this dangerous gas in your home. Heating appliances and generators are the most frequent causes for CO poisoning.

When exposed to minute concentrations of CO, you could notice dizziness, headaches, fatigue nausea, or vomiting. Extended exposure to high concentrations could lead to cardiopulmonary arrest, and potentially death.

Recommendations For Where To Place Seattle Carbon Monoxide Detectors

If you don’t own at least one carbon monoxide detector in your interior, buy one today. Preferably, you ought to install one on every level of your home, and that includes basements. Explore these tips on where to place carbon monoxide detectors in Seattle:

• Install them on every floor, specifically in areas where you utilize fuel-burning appliances, including furnaces, fireplaces, gas dryers, and water heaters.
• You ought to always have one within 10 feet of sleeping areas. If you only get one CO detector, this is where it should go.
• install them at least 10 to 20 feet away from sources of CO.
• Avoid placing them immediately next to or above fuel-burning appliances, as a small degree of carbon monoxide might be released when they turn on and prompt a false alarm.
• Secure them to walls approximately five feet from the ground so they may measure air where people are breathing it.
• Avoid installing them in dead-air places and near windows or doors.
• Put one in areas above garages.

Inspect your CO detectors regularly and maintain them in accordance with manufacturer recommendations. You will usually have to replace them in six years or less. You should also make certain any fuel-consuming appliances are in in good working order and have appropriate ventilation.